Content Security Gateway User’s Manual
Destination Address – select “Outside_Any”
Service - select “ANY”
Action - select “Permit”
Click on OK to apply the changes.
STEP 4:
The configuration is successful when the screen below is displayed.
Please make sure that all the computers that are connected to the LAN port have their Default Gateway IP Address set to the Content Security Gateway’s LAN IP Address (i.e. 192.168.1.1). At this point, all the computers on the LAN network should gain access to the Internet immediately. If a Content Security Gateway filter function is required, please refer to the Policy section in chapter 4.
- 10 -