Content Security Gateway User’s Manual

Step 1: Click Incoming under the Policy menu to enter the Incoming window. The Incoming table will display current defined policies from the WAN network to assigned Mapped IP or Virtual Server.

Step 2: The fields of the Incoming window are:

„Source: Source networks which are specified in the WAN section of the Address menu, or all the WAN network addresses.

„Destination: Destination networks, which are IP Mapping addresses or Virtual server network addresses created in Virtual Server menu.

„Service: Services supported by Virtual Servers (or Mapped IP).

„Action: Control actions to permit or deny packets from WAN networks to Virtual Server/Mapped IP travelling through the device.

„Option: Specify the monitoring functions on packets from WAN networks to Virtual Server/Mapped IP travelling through the Content Security Gateway.

„Configure: Modify settings or remove incoming policy.

„Move: This sets the sequence of the policies, number 1 being the first policy to proceed.

Adding an Incoming Policy

Step 1: Under Incoming of the Policy menu, click the New Entry button.

Step 2: Configure the parameters

- 157 -