In the DMZ To WAN window, locate the name of policy desired to be modified and click its corresponding Modify option in the Configure field.
In the Modify Policy window, fill in new settings.

Content Security Gateway User’s Manual

Content Blocking: Select Enable to enable Content Blocking.

Max. Concurrent Sessions: The maximum concurrent sessions that allows to pass through CS-500. 0 means it is unlimited.

QoS: Select the item listed in the QoS to enable the policy to automatically execute the function in a certain time and range.

Step 3: Click OK to add new policy or click Cancel to cancel adding.

Modifying a DMZ To WAN policy:

Step 1:

Step 2:

NOTE: To change or add selections in the drop-down list, go to the section where the selections are setup. (Source Address → DMZ of Address; Destination Address →WAN, Service →Pre-defined Service, Custom or Group under Service.)

Step 3: Click OK to save modifications or click Cancel to cancel modifications.

Removing a DMZ To WAN Policy:

Step 1. In the DMZ To WAN window, locate the name of policy desired to be removed and click its corresponding Remove option in the Configure field.

Step 2. In the Remove confirmation dialogue box, click OK.

- 165 -