Content Security Gateway User’s Manual

4.3.2.3 Group

Accessing the Group window

Step 1. Click Group under it. A window will appear with a table displaying current service group settings set by the Administrator.

ÍÍ

Definitions:

Group name: The Group name of the defined Service.

Service: The Service item of the Group.

Configure: Configure the settings of Group. Click Modify to change the parameters of the Group. Click Remove to delete the Group.

NOTE: In the Group window, if one of the Service Groups has been added to Policy. “In Use” message will appear in the Configure column. You are not allowed to modify or remove the settings. Go to the Policy window, remove the Service group first, and then you are allowed to configure the setting.

Adding Service Groups

Step 1. In the Group window, click the New Entry button.

Step 2. In the Add Service Group window, the following fields will appear:

„Available service: list all the available services.

„Selected service: list services to be assigned to the new group.

-62 -