Content Security Gateway User’s Manual
Username: Enter the PPPoE username provided by the ISP.
Password: Enter the PPPoE password provided by the ISP.
IP Address provided by ISP:
Dynamic: Select this if the IP address is automatically assigned by the ISP.
Fixed: Select this if you were given a static IP address. Enter the IP address that is given to you by your ISP.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.Auto Disconnect: The PPPoE connection will automatically disconnect after a length of idle time (no activities). Enter in the amount of idle minutes before disconnection. Enter ‘0’ if you do not want the PPPoE connection to disconnect at all.
Ping: Select this to allow the WAN network to ping the IP address of the Content Security Gateway. This will allow people from the Internet to be able to ping the Content Security Gateway. If it sets to enable, the device will respond to echo request packets from the WAN network.
HTTP: Select this to allow the device WebUI to be accessed from the WAN network. This will allow the WebUI to be configured from a user on the Internet. Keep in mind that the device always requires a username and password to enter the WebUI.
For Dynamic IP Address (Cable Modem User): This option is for users who are automatically assigned an IP address by their ISP, such as cable modem users. The following fields apply:
- 39 -