Planet Technology FGSW-4840S user manual

Protocol version: display the version of the Utility protocol.

Product Name: display the Switch model name.

System Name: display the appointed Switch system name.

Location: display where the Switch is located.

Trap IP: display the IP address where the Trap to be sent.

Subnet Mask: display the Subnet Mask set of the Switch.

Gateway: display the Gateway set of the Switch.

View Trap: The trap function can receive the events that happen from FGSW-4840S in the Monitor List. There is a light indicator behind the “View Trap” button, when the light indicates in green, it means that there is no trap received, and else when it indicates in red, it means that there is new trap received, the screen in Figure 3-15appears.

Figure 3-15View Trap screen

When clicked the “View Trap” button, the latest Trap Information screen will shown and display the trap information including the Symbol, Time, Switch IP and the Event occurred. The screen in Figure 3-16appears.

The symbol “!” represents the trap signal arise, this symbol will disappear after you review and click on the event information.

14