Physical Details

Front-mounted LEDs

IAD-200

IAD-200W

Power LED (Green)

Status LED (Yellow)

LAN

WLAN LED

(IAD-200W only)

ADSL

PSTN

Phone

Figure 2: Front Panel

On - Power on.

Off - No power.

Off - Normal operation.

Blinking - This LED blinks during start up, and during a Firmware Up- grade.

•100BT - This will be ON if the LAN connection is using 100BaseT, and Blinking if data is being transferred via the LAN port.

•10BT - This will be ON if the LAN connection is using 10BaseT, and Blinking if data is being transferred via the LAN port.

If neither LED is on, there is no active connection on the LAN port.

On - Wireless enabled.

Off - No Wireless connections currently exist.

Flashing - Data is being transmitted or received via the Wireless access point. This includes "network traffic" as well as user data.

On - ADSL connection established. (This is a low-level connection, it does not mean Internet access is available.)

Off - No ADSL connection currently exists.

Flashing - Data is being transmitted or received via the ADSL connection.

Off - Idle or not connected.

Flashing - PSTN line is in use.

On - Connected to SIP Server.

Off - Idle or not connected.

Flashing (quickly) -Phone is in use.

5