Configuration Program

The IAD-200 / IAD-200W contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must support JavaScript.

The configuration program has been tested on the following browsers:

•Netscape 7.1 or later.

•Mozilla 1.6 or later

•Internet Explorer V5.5 or later

Preparation

Before attempting to configure the IAD-200 / IAD-200W, please ensure that:

•Your PC can establish a physical connection to the IAD-200 / IAD-200W. The PC and the device must be directly connected (using the Hub ports on the IAD-200 / IAD-200W) or on the same LAN segment.

•The device must be installed and powered ON.

•If the IAD-200 / IAD-200W's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the device is allocated a new IP Address during configuration.

Using UPnP

If your Windows system supports UPnP, an icon for the IAD-200 / IAD-200W will appear in the system tray, notifying you that a new network device has been found, and offering to create a new desktop shortcut to the newly-discovered device.

•Unless you intend to change the IP Address of the IAD-200 / IAD-200W, you can accept the desktop shortcut.

•Whether you accept the desktop shortcut or not, you can always find UPnP devices in My Network Places (previously called Network Neighborhood).

Double - click the icon for the IAD-200 / IAD-200W (either on the Desktop, or in My Network Places) to start the configuration. Refer to the following section Setup Wizard for details of the initial configuration process.

Using your Web Browser

To establish a connection from your PC to the IAD-200 / IAD-200W:

1.After installing the IAD-200 / IAD-200W in your LAN, start your PC. If your PC is already running, restart it.

2.Start your WEB browser.

3.In the Address box, enter "HTTP://" and the IP Address of the IAD-200 / IAD-200W, as in this example, which uses the device's default IP Address:

HTTP://192.168.0.1

4.When prompted to login, use the following username and password.

•User name: admin

•Password: password

11