Wireless Security (IAD-200W only)

This screen is accessed by clicking the "Configure" button on the Wireless screen. There are 3 options for Wireless security:

•Disabled - no data encryption is used.

•WEP - data is encrypted using the WEP standard.

•WPA-PSK- data is encrypted using the WPA-PSK standard. This is a later standard than WEP, and provides much better security than WEP. If all your Wireless stations support WPA-PSK, you should use WPA-PSK rather than WEP.

WEP Wireless Security

Figure 8: WEP

Data - WEP Screen

WEP Data Encryption

WEP Data

Select the desired option, and ensure the Wireless Stations use the

Encryption

same setting.

 

• 64 Bit - data is encrypted, using the default key, before being

 

transmitted. You must enter at least the default key. For 64 Bit En-

 

cryption, the key size is 10 chars in HEX (0~9 and A~F).

 

• 128 Bit - data is encrypted, using the default key, before being

 

transmitted. You must enter at least the default key. For 128 Bit

 

Encryption, the key size is 26 chars in HEX (0~9 and A~F).

 

 

Authentication

Normally, this should be left at the default value of "Automatic". If

Type

changed to "Open System" or "Shared Key", ensure that your Wireless

 

Stations use the same setting.

 

 

Default Key

Select the key you wish to be the default. Transmitted data is

 

ALWAYS encrypted using the Default Key; the other Keys are for

 

decryption only.

 

You must enter a Key Value for the Default Key.

 

 

20