Internet (VC1)

 

Connection Method

Displays the current connection method, as set in the Setup

 

 

Wizard.

 

 

 

 

Connection Status

This indicates the current status of the Internet Connection

 

 

Active - Connection exists

 

 

Idle - No current connection, but no error has been detected.

 

 

This condition normally arises when an idle connection is

 

 

automatically terminated.

 

 

Failed - The connection was terminated abnormally. This

 

 

could be caused by Modem failure, or the loss of the connec-

 

 

tion to the ISP's server.

 

 

If there is an error, you can click the "Connection Details" button

 

 

to find out more information.

 

 

 

 

Internet IP Address

This IP Address is allocated by the ISP (Internet Service Pro-

 

 

vider). If using a dynamic IP address, and no connection currently

 

 

exists, this information is unavailable.

 

 

 

 

Connection Details

Click this button to open a sub-window and view a detailed

 

 

description of the current connection. Depending on the type of

 

 

connection, a "log" may also be available.

 

 

 

 

LAN

 

 

IP Address

The IP Address of the IAD-200 / IAD-200W.

 

 

 

 

Network Mask

The Network Mask (Subnet Mask) for the IP Address above.

 

 

 

 

DHCP Server

This shows the status of the DHCP Server function. The value

 

 

will be "Enabled" or "Disabled".

 

 

 

 

MAC Address

This shows the MAC Address for the IAD-200 / IAD-200W, as

 

 

seen on the LAN interface.

 

 

 

 

Wireless (IAD-200W only)

 

Name (SSID)

If using an ESS (Extended Service Set, with multiple access

 

 

points) this ID is called an ESSID (Extended Service Set Identi-

 

 

fier).

 

 

 

 

Region

The current region, as set on the Wireless screen.

 

 

 

 

Channel

This shows the Channel currently used, as set on the Wireless

 

 

screen.

 

 

 

 

Wireless AP

This indicates whether or not the Wireless Access Point feature is

 

 

enabled.

 

 

 

 

Broadcast Name

This indicates whether or not the SSID is Broadcast. This setting

 

 

is on the Wireless screen.

 

 

 

 

Buttons

 

 

ADSL Details

View the details of each VC (Virtual Circuit).

 

 

 

 

Connection Details

Click this button to open a sub-window and view a detailed

 

 

description of the current connection.

 

 

 

 

Attached Devices

This will open a sub-window, showing all LAN and Wireless

 

 

 

92