BLOCK rule. (That is, you wish to allow a subset of traffic which is currently blocked by another rule.)
•To define the Schedule used in these selections, use the "Schedule" screen.
LAN Users | Select the desired option to determine which PCs are covered by this |
| rule: |
| • Any - All PCs are covered by this rule. |
| • Single PC - Only the selected PC is covered by this rule. |
| If selected, you must select the PC. |
| PC - If using Single PC above, select the PC or Server on your LAN |
| which will be covered by this rule. |
|
|
WAN Users | These settings determine which packets are covered by the rule, based |
| on their source (WAN) IP address. Select the desired option: |
| • Any - All IP addresses are covered by this rule. |
| • Address range - If this option is selected, you must enter the "Start" |
| and "Finish" fields. |
| • Single address - Enter the required address in the "Single/Start" |
| fields. |
|
|
Log | This determines whether packets covered by this rule are logged. Select |
| the desired action. |
| • Always - always log traffic considered by this rule, whether it |
| matches or not. (This is useful when debugging your rules.) |
| • Never - never log traffic considered by this rule, whether it matches |
| or not. |
| • Match - Log traffic only it matches this rule. (The action is deter- |
| mined by this rule.) |
| • Not Match - Log traffic which is considered by this rule, but does |
| not match (The action is NOT determined by this rule.) |
58