Chapter 2

2

Installation

This Chapter covers the physical installation of the ADSL 2/2+ VoIP router (IAD-200) / 802.11g ADSL 2/2+ VoIP router (IAD-200W).

Requirements

•TCP/IP protocol must be installed on all PCs.

•To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE 802.11g or IEEE 802.11b specifications.

•For Internet Access, an ADSL service and ISP account.

•For VoIP, a SIP account with a VoIP service provider.

Procedure

Figure 4: Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the IAD-200 / IAD-200W. Ensure the power is OFF.

For best Wireless reception and performance, the IAD-200W should be positioned in a central location with minimum obstructions between the device and the PCs.

Also, if using multiple Access Points, adjacent Access Points should use different Channels.

8