Rear Panel

IAD-200

IAD-200W

 

Figure 3: Rear Panel

ADSL port

Connect this port to your ADSL line.

PSTN

Connect this to your PSTN line (normal analog phone line).

Phone

Connect a standard phone here.

LAN

Connect this port to your hub, using the supplied LAN cable.

Reset Button

This button will reset the IAD-200 / IAD-200W to the factory default

(Reset to Defaults)

settings.

 

To do this, press and hold the Reset Button for five (5) seconds, until

 

the Status LED is lit, then release the Reset Button, and wait the

 

IAD-200 / IAD-200W to restart using the factory default values.

Power switch

Press IN for power ON, OUT for power OFF.

Power port

Connect the supplied power adapter here.

7