VoIP

To use the VoIP feature requires the following:

•Standard Phone

A standard analogue Phone must be connected to the Phone socket.

•VoIP (SIP Server) Account

Generally, you will need a SIP Server account from a VoIP service provider. The account details should include the SIP Register address, SIP Proxy address, SIP register port, SIP Proxy port, username, password, and telephone number. (Many providers use the same proxy server for both Proxy and Register.)

•VoIP Configuration

•Your VoIP service provider may perform the configuration for you.

•If not, refer to the following sections, which describe how to configure the Wireless VoIP Gateway.

Refer to Chapter 7 - Operation and Status for details on using VoIP once configuration has been completed.

VoIP Setup Screen

The VoIP setup screen is not on the menu; the VoIP link on the menu displays the VoIP Status screen, described later in this chapter.

To view the VoIP Setup Screen:

1.Connect to the IAD-200 / IAD-200W using its IP address and the path to the VoIP Setup screen ( /set_voip.htm ). For example, if the default IP address has not been changed, use the following:

http://192.168.0.1/set_voip.htm

2.You will see the VoIP Settings screen, like the example below. This screen allows input of the data necessary to establish a connection to the SIP Server.

67