Planet Technology WGSW-2620P 3.3.2.2 Port Commands Set, show, show, show, Level, version, Command, Example, Commands, Defaults, interface, interface, accounting, accounting, Description

			Switch# show
show	Privileged	Show username &	accounting
accounting	EXEC	password	Username: admin
			Password: admin
			Switch> show
			version
		Use the show version user	Firmware version:
show version	User EXEC	EXEC command to display	1.0
		version information for the
		hardware and firmware.	Hardware version:
			3.0
			Kernel version: 1.10
			Switch (config)#
			show terminal
			Baud rate (bits/sec):
		Use the show terminal	9600
	Privileged
		command to display
show terminal
		console information for the	Data Bits: 8
	EXEC
		switch	Parity Check: none
			Stop Bits: 1
			Flow Control: none

3.3.2.2 Port Commands Set

Commands	Command	Description	Defaults	Example
	Level
interface	Interface	Use the fast Ethernet		Switch (config)#
[FastEthernet
		interface configuration		interface
/module Ethernet]	configuratio
		command		fastEthernet 0/1
[slot id] [id]	n mode