3.4.8.1.3 Per Port Setting
STP System Configuration interface
Select <Apply>.
Priority: assign path priority number.
Max Age: the maximum path age
Hello Time: the time that controls switch sends out the BPDU packet to check STP current status.
Forward Delay Time: forward delay time.
Select <Edit>
You can configure the STP system parameter after enable the STP function. You can view spanning tree informationa about the Root Bridge on the left.
1.
2.
3.
4.
5.
6.
3.4.8.1.2 System Configuration

1.Select <Edit>.

2.Path Cost: specifies the path cost of the port that switch uses to determine which port are the forwarding ports.

3.Priority: This is mean port priority; you can make it more or less likely to become the root port.

4.Press “ESC” goes back action menu line.

5.Select <Apply> to apply all configure value.

6.On the action menu line you can press <Next Page> to configure rest of ports, press <Previous Page> return to previous page.