Switch basic setting interface

4.7.2.2 Advanced Setting

 

 

 

 

Queue Service. After the configuration, click

Apply

button to complete the configuration.

 

„

MAC Address Table Entry

 

 

。Age-out Time: fill in the number of seconds that an inactive MAC address remains in the switch's address table. The valid range is 300~765 seconds. Default is 300 seconds.

。Max Bridge Transmit Delay Bound Control: limit the packets queuing time in switch. If enable, the packets queued exceed will be drop. This valid value are 1sec, 2 sec, 4 sec and off.

。Enable Low Queue Delay Bound: limit the low priority packets queuing time in switch. If the low priority packet stays in switch exceed Max Delay Time, it will be sent. The valid range is 1~255 ms.

"Note: Make sure of "Max bridge transit delay bound control" is enabled before enable Delay

Bound, because Enable Delay Bound must be work under "Max bridge transit delay bound control is enabled" situation.

。Broadcast Storm Filter Mode: configure broadcast storm control. Enable it and set the upper threshold for individual ports. The threshold is the percentage of the port's total bandwidth used by broadcast traffic. When broadcast traffic for a port rises above the threshold you set, broadcast storm control becomes active. The valid threshold values are 5%, 10%, 15%, 20%, 25% and off.