Planet Technology WGSW-2620P 0/2, [seconds], hello-time, [PortCost], hello-time3, spanning-tree, spanning-tree, stp-path-cost, stp-path-cost20, interface fastEthernet

		receive a bridge
		protocol
		data unit (BPDU)
		message from the
		root switch within
		this interval, it
		recomputes the
		Spanning Tree
		Protocol (STP)
		topology. Use the
		no form of this
		command to return
		to the default
		interval.
		Use the
		spanning-tree
		hello-time global
		configuration
		command to
		specify the interval
spanning-tree	Global	between hello		Switch (config)#
hello-time	configuratio		2 sec.	spanning-tree
[seconds]	n mode	bridge protocol		hello-time 3
		data units
		(BPDUs). Use the
		no form of this
		command to return
		to the default
		interval.
		Use the	10 Mbps	Switch (config)#
		spanning-tree cost
				interface fastEthernet
	Interface	interface	– 100
stp-path-cost
				0/2
	configuratio
		configuration
[PortCost]
	n mode
		command to set		Switch (config-if)#
		the path cost for	100 Mbps	stp-path-cost 20
		Spanning Tree