Planet Technology WGSW-2620P 3.3.2.6 QoS Commands Set, 0/2, qos, qos, qos, d on, ound, Level, Command, Example, Commands, Defaults, or no qos, (%)] or no, Description, storm-control

		Use the
		spanning-tree
		port-priority
		interface
		configuration
		command to		Switch (config)#
	Interface	configure a port		interface fastEthernet
stp-path-priority
	configuratio	priority that is used	128	0/2
[Port Priority]
	n mode	when two switches
				Switch (config-if)#
		tie for position as		stp-path-priority 127
		the root switch.
		Use the no form of
		this command to
		return to the
		default value.

3.3.2.6 QoS Commands Set

Commands	Command	Description	Defaults	Example
	Level
		Enable/Disable
qos storm-control		broadcast storm
[510152025 off	Global	control. Use the no		Switch (config)# qos
			OFF
(%)] or no	configuratio	form of this		storm-control 5
storm-control	n mode	command to
		restore to default.
qos		Enable/Disable
low-priority-delay-b		low priority delay
				Switch (config)# qos
ound [onoff] [sec.]	Global	board.
			OFF	low-priority-delay-boun
or no qos	configuratio
		Use the no form of		d on 1
	n mode
low-priority-delay-b
		this command to
ound		restore to default.