Planet Technology WGSW-2620P show, monitor both, port monitor, no port monitor, show port monitor

no port monitor		Analyzer (SPAN)	monitor both 3
		port monitoring on
		a port. Use the no
		form of this
		command to return
		the port to its
		default value.
			Switch (config-if)# show
			port monitor
			State: ENABLE
			AnalysisPortId: 8
			Port 1 Rx: Monitor
			Port 1 Rx: Monitor
			Port 2 Rx:
		Use the show port	Port 2 Rx:
		monitor privileged	Port 3 Rx: Monitor
		EXEC command	Port 3 Rx: Monitor
	Interface	to display the ports
show port monitor	configuratio	for which Switched	Port 4 Rx:
	n mode	Port Analyzer	Port 4 Rx:
		(SPAN) port	Port 5 Rx:
		monitoring is	Port 5 Rx:
		enabled.
			Port 6 Rx:
			Port 6 Rx:
			Port 7 Rx:
			Port 7 Rx:
			Port 8 Rx: Analysis
			Port 8 Tx: Analysis
			Port 9 Rx:
			Port 9 Rx: