Planet Technology WGSW-2620P status, status, [value], Disable], interface, interface, interface, interface, bandwidth hi, state disable, configuration, configuration, show interface

		Set bandwidth in or out		Switch (config)#
		rate. The value rage is
				interface
	Interface	(0~999), and zero of the
Bandwidth [in out]
				fastEthernet 0/1
	configuratio		Disable
		value is disable
[value]
	n mode
				Switch (config-if)#
		(The module can’t be
				bandwidth hi 50
		setting)
		Use the state interface
		configuration command		Switch (config)#
	Interface	to specify the state mode		interface
State [Enable
	configuratio	of operation for Ethernet	Enable	fastEthernet 0/1
Disable]
	n mode	ports. Use the disable
				Switch (config-if)#
		form of this command to		state disable
		disable the port.
				Switch (config)#
				interface
show interface	Interface	show interface		fastEthernet 0/1
	configuratio
configuration		configuration status
	n mode			Switch (config-if)#
				show interface
				configuration
				Switch (config)#
				interface
show interface	Interface	show interface actual		fastEthernet 0/1
	configuratio
status		status
	n mode			Switch (config-if)#
				show interface
				status