VLAN Configure interface

3.4.5.2 Create VLAN Group

Create Port-Based VLAN

1.Select <Edit>.

2.VLAN Name: Type a name for the new VLAN, ex: VLAN01.

3.Group ID: Type the VLAN group ID.

4.Member: Press "Space" key to change the member value. There are two types to selected:

。Member: the port is a member port.

。NO: it means that port is NOT a member port.

5.Press "ESC" key to go back action menu line.

6.Select <Apply> to apply the configuration.

"Note: If you have configured the trunk groups, you can see it (ex: Trunk1, Trunk2…) in the port list.

You also can configure the trunk group as the VLAN member.