4.4 System Login

1.Launch the Internet Explorer.

2.Type "http://" and the IP address of the WGSW-2620PV and press "Enter".

3.The login screen appears.

4.Key in the user name and password. The default user name and password is "admin ".

5.Click "Enter" or "OK", then the home screen of the Web-based management appears.

WGSW-2620PV Web Management Interface

4.5 Port status

In Port status, you can view every port status that depended on user setting and the negotiation result.

1.Link: Down is "No Link". UP is "Link".

2.State: display port statuses "disable" or "enable". "Unlink" will be treated as "off ".

3.Negotiation: display the auto negotiation mode: auto/force/Nway-force. "Config" means the value that user configured. "Actual" means the current value of the port.

4.Speed Duplex: display port connection speed. "Config" means the value that user configured. "Actual" means the current value of the port.

5.Flow Control: Full: display the flow control status is "enable" or "disable" in full mode. "Config" means the value that user configured. "Actual" means the current value of the port.

6.Back Pressure: Display the Back Pressure status setting. "Config" means the value that user configured. "Actual" means the current value of the port.

7.Bandwidth: display the in and out bandwidth of each port.

8.Priority: display the port static priority status is "High" or "Low" or "Disable".