Appendix B Specifications5, Plustek OptiCard | Plustek 820 guide

Appendix B:

Specifications5

Plustek OptiCard 820

	Physical	174.5mm x 60.5mm x 38.5 mm
	dimensions	174.5mm x 60.5mm x 38.5 mm
	dimensions
	Weight	194g
	Operating	10° C to 40° C (50° F to 104° F)
	Temperature	10° C to 40° C (50° F to 104° F)
	Temperature
	Scan Area	Maximum 105 mm x 148 mm (4.13” x 5.83”)
	Scan Area	Minimum 33mm x 43 mm
		Minimum 33mm x 43 mm
	Scan Method	Single –Pass
		Color: Input 48-it; Output 24/48-bit
	Scan Modes	Grayscale: Input 16-bit; Output 8/16-bit
		Black & White: 1-bit
	Resolution	Optical 600 dpi (1200dpi software interpolated)
	Scanning	Reflective color or black-and-white originals
	Materials	Paper Thickness: from 0.08 mm to 0.9 mm
	Protocols	TWAIN Compliant
	Connection	USB 2.0
	Light Source	Three-color RGB LEDs
	Power	Powered through USB port. No AC power adaptor is required.
	Requirement	Powered through USB port. No AC power adaptor is required.
	Requirement
	Power	Operation: 2.5 watts maximum
	Consumption	Idle: 0.7 watts
	EMI	FCC Class B

5Hardware specifications may change at any time without prior notice.

26

Image 29

Plustek 820 manual Appendix B Specifications5, Plustek OptiCard

Contents

Installation Usage & Maintenance Troubleshooting Page Table of Contents Introduction How to Use This Guide System Requirements1 Conventions of This Guide Scanner’s Features Box Contents2 Product Information Hardware Requirements Chapter I. Installing the ScannerSoftware Installation Requirements Installing the Software Installing and Setting up the ScannerConnecting the Scanner to Your Computer For Windows XP & Me For Windows 98 Testing the Scanner Scanner Setup After Windows XP Upgrade Software Setup TroubleshootingInstalling Additional Software Page Operating the Scanner Chapter Usage and Maintenance Scan Button BCR Button Using the Scanner ButtonsScan Button Single scan by different settings BCR Button Continuous scans by the same settings Light Status Status IndicatorChanging Button Settings Appearance Status Scanner Connection Calibrating the Scanner Maintenance Cleaning the Scanner Usage & Maintenance TipsPage Scanning Problems Appendix a TroubleshootingSymptom Scanned image looks grainy on the screen Symptom Scanner scans very slow Symptom Unable to save to a floppy diskette Symptom Error Scanner not Found that is displayed Symptom Disk I/O error- message is displayed Common -How-to- Questions Symptom How do I save the scanned image in JPG format? How to import images Plustek OptiCard Appendix B Specifications5 Statement of Limited Warranty Appendix C Customer Service and Warranty FCC Radio Frequency Statement Page Europe Contacting Plustek