ENGLISH

5.Select YES to start the search again.

6.Select NO to cancel the searching.

7.To return to time mode, press and hold the BACK button.

Pairing a New Stride Sensor With Training Computer

Make sure the stride sensor has been correctly attached to your shoe. For more information on setting up the stride sensor refer to the user manual of the stride sensor or to the video tutorial at http://www.polar.fi/en/support/video_tutorials.

1.Go to Menu > Settings > Sport profiles > Running > Stride sensor > Search new and press OK.

2.Searching for new stride sensor is displayed. The training computer starts searching for the stride sensor signal.

3.Once the new stride sensor is identified, Stride sensor found is displayed. Pairing is complete.

4.If the search is not successful, Stride sensor not found or Other stride sensors interfering. Move further., Try again? YES / NO is displayed.

5.Select YES to start the search again.

6.Select NO to cancel the searching.

7.To return to time mode, press and hold the BACK button.

42Using a New Accessory

Page 42
Image 42
Polar RCX5 user manual Pairing a New Stride Sensor With Training Computer