User Guide for the Polycom CX700 IP Phone
A list of supported headsets is available in the Voice section of Polycom’s Support web site at http://www.polycom.com/global/documents/support/technical/products/voice/CX200 _700_Headset_Compatibility.pdf.
If headsets are deployed in high static environments where users frequently disconnect and
You should take precautions to avoid excessive static buildup in your environment. This can include humidity control and removal of synthetic materials near the phone location. Antistatic spray applied to carpets in the workplace can reduce the level of static buildup.
Connecting the Phone to the Network
Use Power over Ethernet (PoE) for network and power source connections unless otherwise directed by your system administrator.
To connect the network and AC power:
>>Plug the supplied network cable between the LAN jack on the back of the phone and an available network
Using the supplied network cable, the phone can be powered from a PoE (IEEE 802.3af) enabled network port.
The phone will begin to power up.
If there is no PoE enabled network data part available, contact your system administrator for an AC/DC power adapter. Plug the AC/DC power adapter into the Polycom CX700 IP phone’s power plug, then plug one end of in the country specific power cord into the power adapter and the other end into an available AC outlet.
1 - 4
