Polycom 4400 - page 14

Configuration Guide

require the following minimum dBm reading to support the

corresponding Mandatory data rate setting in the access point.

802.11

Radio Standard Minimum Available

Signal Strength (RSSI) Maximum

“Mandatory” Data Rate

-70 dBm 1 Mb/s

802.11b -60 dBm 11 Mb/s

-60 dBm 6 Mb/s

802.11a -45 dBm 54 Mb/s

For additional details on RF deployment please see the Deploying

Enterprise-Grade Wi-Fi Telephony white paper and the Best

Practices Guide for Deploying SpectraLink 8020/8030 Wireless

Telephones.

PN: 1725-36070-001_P.doc

Contents

Main VIEW Certified Configuration Guide Cisco Trademark Information Patent Information Copyright Notice Notice Contact Information Introduction Certified Product Summary Known Limitations Access Point Capacity and Positioning Network Topology Configuring a New Controller Starting from Factory Defaults Connecting to the Controller via a Browser Installing Software Controller Setup Connecting APs Page AP Configuration Configuration for SpectraLink Wireless Telephones running in 802.11b mode Page Page Page Configuration for SpectraLink Wireless Telephones running in 802.11a mode Page Page Page Setting Up the SSIDs Setting up the voice SSID Page Page Further Assistance