Polycom 4400 Setting Up the SSIDs

Configuration Guide

Setting Up the SSIDs

It is required for voice and data to be on separate SSIDs to prioritize

voice traffic. The voice SSID must be set to Platinum for Quality of

Service (as shown in the screen shot below) and the data SSID must

be set to Silver for Quality of Service.

1. From the main menu, click WLANs.

2. In the WLANs screen, click the New…. button.

3. Type the Profile Name and the WLAN SSID name.

4. Click the Apply button.

PN: 1725-36070-001_P.doc

Contents

Main VIEW Certified Configuration Guide Cisco Trademark Information Patent Information Copyright Notice Notice Contact Information Introduction Certified Product Summary Known Limitations Access Point Capacity and Positioning Network Topology Configuring a New Controller Starting from Factory Defaults Connecting to the Controller via a Browser Installing Software Controller Setup Connecting APs Page AP Configuration Configuration for SpectraLink Wireless Telephones running in 802.11b mode Page Page Page Configuration for SpectraLink Wireless Telephones running in 802.11a mode Page Page Page Setting Up the SSIDs Setting up the voice SSID Page Page Further Assistance