Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs
Controller Setup The initial setup of the controller is shown below.
The setup instructions outlined in this document are for the
configuration shown in the diagram only. Your configuration may
differ, and the appropriate adjustments must be made.
It is not necessary to configure each AP individually. The WLC is
capable of provisioning the APs.
1. From the main menu, click Controller.
2. Set the Ethernet Multicast Mode to Multicast and enter a multicast
IP address that is currently not being used on your network for
the Multicast Group Address.
3. Click the Apply button.
4. Click Save Configuration.
PN: 1725-36070-001_P.doc 9