Polycom 4400 manual Set Admin Status to Enable

Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs

4.Set Admin Status to Enable.

5.Configure any other settings that might be relevant to your deployment as needed.

6.Click the Apply button to save all changes.

7.In the navigation pane under 802.11a/n, select Network.

8.Set 802.11a Network Status to Disable; the radio will be re-enabled after setting radio parameters

9.For setting up the Data Rates, please consult your facility’s RF site survey, designed for voice traffic, to determine if you have sufficient coverage to support all data rates. SpectraLink Wireless Telephones require the following minimum dBm reading to support the corresponding Mandatory data rate setting in the access point.

802.11	Minimum Available	Maximum
Radio Standard	Signal Strength (RSSI)	“Mandatory” Data Rate
802.11b	-70 dBm	1 Mb/s
	-60 dBm	11 Mb/s
802.11a	-60 dBm	6 Mb/s
	-45 dBm	54 Mb/s

For additional details on RF deployment please see the Deploying

Enterprise-GradeWi-Fi Telephony white paper and the Best

Practices Guide for Deploying SpectraLink 8020/8030 Wireless

Telephones.

PN: 1725-36070-001_P.doc 17