Chapter 1- Hardware Description
Table | MPM+ Resource/Port Capacity | |
|
| |
Resource Type | Maximum Capacity (4 MPM+ Cards) | |
|
|
|
CIF |
| 320 |
|
|
|
SD30 |
| 120 |
|
|
|
HD720p |
| 80 |
|
| |
HD1080p | 40 | |
|
| |
720p VSW 4Mb | 160 | |
|
| |
1080p VSW 4Mb | 160 | |
|
| |
1080p VSW 6Mb | 80 | |
|
|
|
RMX memory size is listed in the Administration > System Information properties box.
In HD Video Switching conferences, an RMX with four MPM+ cards can support up to 160 participants at HD1080p resolution at bandwidths of up to 4Mbps and 80 participants at HD1080p resolution at bandwidths of up to 6 Mbps.
MCU “Mode” Guidelines
MPMx and MPM+ Modes
•MPMx and MPM+ cards installed in the system cannot be used simultaneously. Therefore, the RMX can operate in either an MPM+ or MPMx mode.
•MPMx Mode is the mode in which the RMX operates to fully utilize the increased power and capacity of MPMx cards.
•ISDN support is the same as for MPM+/MPMx cards.
•G.719 audio algorithm is not supported with MPMx.
Operating Mode Selection During Startup / Restart
When started with Version 7.0 installed, the RMX enters MPMx Mode by default when no media cards are installed.
