Polycom DOC2559A manual Site Safety Requirements

Chapter 1- Hardware Description

Safety Requirements

This section describes the requirements your site must meet for safe installation and operation of the system.

Site Safety Requirements

For your protection, please read these safety instructions completely before operating the equipment.

•Look carefully for potential hazards in your work area: moist floors, ungrounded power cables, frayed power cords, missing safety grounds and so forth.

•Locate the main circuit breaker within the room.

•Locate the emergency power OFF switch within the room.

•Never assume that power is disconnected from a circuit.

•Use only the power cords supplied with the system.

•Each power cord should only be connected to a power outlet that has a protective ground contact.

•Ensure that power cords are easily accessible from the back of the system at all times.

•Place the equipment in a well-ventilated area where the vents are free from obstruction.

•Do not place heavy objects directly on top of the RMX 4000 unit.

•Do not use liquids around your equipment.

•Keep the area around the RMX 4000 clean and free of clutter.

•Decide on a suitable location for the equipment rack that will hold the RMX 4000 unit. It should be situated in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and electromagnetic fields are generated. You will also need it placed near a grounded power outlet.

1-8