Polycom RMX 4000 Hardware Guide
Replacing an AC Power Supply Module
Two units supply power to the RMX 4000 (3rd optional - AC only), each unit with its own power cord. Use the following procedure to replace a
Power Supply unit:
Please verify the type of power supply used on your RMX 4000. Do not insert a different type of power supply than the current type installed on your system.
1Unscrew the captive screws on the front panel of the Power Supply unit that secures the unit to the chassis.
2Using your right hand, press your thumb on the pressure latch and with your fingers inserted in the hand grip (on top), pull the Power Supply unit out.
Place thumb | Finger grip |
here |
|
