Polycom RMX 4000 Hardware Guide
Connecting Cables on the RMX 4000
To connect the cables (AC and DC systems):
•RTM-IP 4000:
—Connect the Management Network cable to LAN 2.
—Connect the Signalling cable to LAN 3.
—Connect the Shelf Management cable to LAN 6.
•For each installed RTM LAN - Connect the LAN cable to LAN 2.
•For each installed RTM ISDN:
—Connect the E1/T1 cables to their PRI Ports.
—Connect the LAN cable to LAN 1.
LAN Connections to RTM LAN E1/T1 Connection to RTM ISDN
Signalling
Network
Management
Network
Off/On switch
Shelf Manage- ment
Power Cables
Figure 1-6 RMX 4000 Rear Panel View with AC Power and Communication Cables
•LAN 4, LAN 5 and the Serial ports are only for debugging and not for customer use.
•Do not remove the protective plastic caps from LAN 1, LAN 4 and LAN 5 ports.
