Polycom RMX 4000 Hardware Guide
Table
Slot ID/No. | Card/Component | Requirement |
|
|
|
7 | Logo Panel | Not Available (NA) |
|
|
|
8 | CTNL 4000 unit | Mandatory |
| (CPU 1) |
|
|
|
|
AC Power Supply | An RMX with AC power has 3 power | |
|
| supplies installed. A 3rd power supply is |
|
| redundant (n+1). |
|
| Note: Not used with DC powered |
|
| systems. DC powered systems receive |
|
| Direct Current from the power rail . |
|
|
|
12 | Fan Drawer | Mandatory |
|
|
|
RTM ISDN/RTM | Either an RTM ISDN or an RTM LAN | |
| LAN | card is mandatory in combination with a |
|
| Media card. The RTM ISDN/RTM LAN |
|
| board must be inserted in a slot opposite |
|
| any MPM+/MPMx card. |
|
|
|
17 | Mandatory | |
|
|
|
18 | Blank Panel | Not Available (NA) |
|
|
|
Power Modules | Mandatory: | |
|
| With AC power, 3 power supplies are |
|
| installed, with the 3rd redundant. |
|
| With DC power, 2 power supplies are |
|
| installed with the 2nd redundant. The |
|
| center slot (#20) on the rear of the RMX |
|
| 4000 is disabled and is fitted with blank |
|
| panel. |
|
| Note: Protective bonding conductor size |
|
| is 14AWG (1.5mm) within the Power |
|
| Entry Model. |
|
|
|
