THE EF BUS
THE EF BUS
The EF Bus is a high speed, low delay digital bus that includes the W, X, Y, and Z audio busses, the P bus, as well as the echo canceller bus reference and remote control information (for other EF devices). It can link up to 8 Vortex devices. The W, X, Y, and Z busses include NOM information and can be used for sharing microphone inputs, or for sharing mono or stereo program information.On the EF Bus page in Conference Composer, the inputs coming in to each submatrix labelled WB0, WB1,
... WB7 correspond with the device ID of the bus that is transmitting. The “B” denotes Bus. The submixes themselves, denoted as WM0, WM1, and WM2 are mixes that are input into the main matrix. The “M” denotes Mix.
The P Bus. The P Bus is provided specifically to allow devices to share digital phone audio from the EF2241. The EF2241 can both transmit and receive signals on the P bus, while the EF2280 can only receive signals from the P bus.
Crosspoint Mix Minus Bus. Each Vortex device in the system can create four output mixes (W, X, Y, and Z) and place them on the bus. Each device also can create three input mixes each from the W, X, Y, and Z busses of the other devices (for a total of 12 mixes). The mixes can have crosspoint gains on the signals from the other devices. See Figure 15 below. All 12 mixes become inputs to the main matrix and can be mixed with the other inputs to create outputs
Figure 15. W, X, Y, and Z submatrices, the P submatrix, and Exported Bus Reference.
VORTEX EF2241 Reference Manual | 24 | Technical Support: 800.932.2774 |
