Regulatory Notices And Warranty Information
6 - 3
Data Equipment
The table below shows which jacks are associated with which modes of
operation:
Automatic Dialing
WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING
TEST CALLS TO EMERGENCY NUMBERS;
•Remain on the line and briefly explain to the dispatcher the reason for the
call.
•Perform such activities in the off-peak hours, such as early morning or late
evening.
Canada
Canadian EMC Class A
English Statement:
This Class [A] digital apparatus complies with Canadian ICES-003.
French Statement:
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du
Canada.
This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number (REN) assigned to each relevant terminal
device provides an indication of the maximum number of terminals allowed
to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
The REN of this equipment is either marked on the unit or included in the new
style USA (FCC registration number). In the case that the REN is included in
the FCC number the user should use the flowing key to determine the value:
The FCC number is formatted as US: AAAEQ##TXXX.
## is the Ringer Equivalence Number without a decimal point (e.g. REN of 1.0
= 10, REN of 0.3 = 03). In the case of a “Z” ringer, ZZ shall appear. In the case
of approved equipment without a network interface and equipment not
connecting to circuits with analog ringing supplied then “NA” shall appear.
Mode of Operation USOC Jack
Permissive RJ11C