Part 19
a matter of few seconds that the system
will automatically shutdown power due
to uprising temperature. Please review
the ventilation condition and
environment temperature, check if the
fan is stuck by contaminants such as dry
grease or threads and try to correct the
situation when the system is off and
cooled down. You may power up the
system again after the system cooled
down and trouble cause removed. However, if the warning pops up soon again,
please consult your dealer for possibly fan replacement on worn out.
TOUCH PANEL (for TP models only)
All paragraphs below are applicable in TP-5600 and TP-5800 only.
The user of LT-5600 and LT-5800 can ignore them and consider this user’s
manual ends here.
Mouse Emulation
The touch panel in Jiva TP-5600 / Jiva TP-5800 uses either a PS2
interface or an RS232 interface. When its driver is properly installed, this
touch panel works exactly like a standard mouse. However, if the system is
running under safe mode, most drivers are disabled in this mode and the touch
panel calibration may not coincide with the mouse pointer. It is recommended
to use a standard USB mouse or keyboard in safe mode.
All the below mentioned mouse emulation functions can be
manipulated through relevant software. The system can give a beep when the
touch panel is touched and can respond as if the left button of a mouse is
clicked at the point touched. If the point touched is dragged across the screen
surface, it can respond as if it is using the mouse drag and drop feature. If the
point is touched, released and touched within a short time interval, it will
simulate double-clicking left button of the mouse. To obtain the effect like
clicking on the right button of a mouse, touching any point on the screen
surface after touching the right-click sticky button results as a click on the right
button of the mouse at that point.
Posiflex Touch Terminal Manager
A program named “Posiflex Touch Terminal Manager” is installed in
the preloaded Windows system with a PS/2 interface touch panel controller.
This program can also be obtained by download from the POSIFLEX web site.
This program can be engaged in the program group “Posiflex Tools”
to control the aforementioned mouse emulation. Find the right-click sticky
button for Win2000 and WinXP in same group.