Part 18
VGA cable or purchase another type of VGA cable and set an internal jumper
in Jiva TP/LT-5600 or Jiva TP/LT-5800 to supply the required power through
the VGA connector. Do not connect other monitor to this port before the
power in this port is disabled.
TOP MOUNT CUSTOMER DISPLAY Please follow the instructions on the manual that comes along with
the top mount customer display PD302 when it is installed.
SERIAL PORTS – COM1/2/3/4 In Jiva TP/LT-5600 / Jiva TP/LT-5800, there are 4 serial ports
available except those models using RS232 touch interface (Infra Red type
touch panel). All the serial ports can supply a +5 V DC through pin 9 after
proper jumper setting change. All 4 ports are standard RS232 serial ports as
status at delivery.
When a serial Modem is to be used in Jiva TP/LT-5600 or Jiva
TP/LT-5800, it is most recommended to use COM2 or COM3 port for this
purpose. In this way any hardware resource conflict is eliminated and the
MODEM ring up function can be supported. For Infra Red type touch control
models (it uses RS232 interface), COM4 is occupied and covered. Please
never try to open the cover. Otherwise the product warranty is voided.
SOUND PORTS The audio port on Jiva TP/LT-5600 / Jiva TP/LT-5800 supports a
Microphone in and a line out jacks. The internal audio output port supports
line output signals and requires power amplifier for connection to speaker
unless the option of audio amplifier and a pair of slim type speakers built in the
cable cover area are ordered at the beginning.
SYSTEM MONITOR In the preloaded OS for Jiva TP/LT-5815, there is an embedded
function that keeps monitoring the interior temperature and the fan revolution
rate and regulating each required fan power to gain maximum ventilation
effect with lowest possible noise. This function also safeguards the system
from damage due to overheat. Once the temperature detected inside the system
is found too high or when either the system
exhaust fan or CPU fan is found inoperative, one
of warning messages like the picture at right will
pop up. When this occurs, please close all
application programs and shutdown the
system immediately to prevent any further
damage. Even if you don’t, it may be only