Powerware 5115A USB manual Te s t i n g N e w B a t t e r i e s

5.Replace the battery. See “Recycling the Used Battery” for proper disposal.

6.Connect the black battery cable to the new battery and then connect the red battery cable.

7.Reinstall the battery.

8.Reinstall the metal battery cover and front panel.

Te s t i n g N e w B a t t e r i e s

NOTE: It is recommended that the batteries charge for 6 to 24 hours before testing.

Press and hold the button for three seconds to initiate a self-test. The 15-second test automatically distributes the load to the batteries and tests the battery’s performance. While the test is in progress, the indicators cycle through and the alarm

sounds. When complete, the UPS returns to Normal mode as indicated by the indicator.

If there is a problem with the battery, the alarm beeps, the indicator illuminates and

the indicator flashes. Check the battery connections and be sure the battery is fully charged. Call your service representative if the problem persists.

R e c y c l i n g t h e U s e d B a t t e r y

Contact your local recycling or hazardous waste centre for information on proper disposal of the used battery.

WARNING

•Do not dispose of the battery or batteries in a fire. Batteries may explode. Proper disposal of batteries is required. Refer to your local codes for disposal requirements.

• Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes. It may be toxic.

CAUTION

Do not discard the UPS or the UPS batteries in the trash. This product contains sealed, lead-acid batteries and must be disposed of properly. For more information, contact your local recycling or hazardous waste centre.

Powerware ® 5115A USB User’s Guide • www.powerware.com.au 19