Powerware 5115A USB manual Powerware

4.Plug the equipment to be protected into the UPS outlet sockets.

DO NOT protect laser printers with the UPS because of the exceptionally high power requirements of the heating elements.

5.Start the UPS by pressing the button as shown in Figure 2. The indicator illuminates, indicating that power is available from the UPS output receptacles.

The UPS conducts a self-test and enters Normal mode. If the alarm beeps or a UPS alarm indicator stays on, see Table 8 on page 26.

The installation is complete. To learn how to operate the UPS, see “Operation” on page 9.

NOTE The batteries charge to 90% capacity in approximately 3 hours. However, it is recommended that the batteries charge for 6 to 24 hours after installation or long-term storage.

Powerware ® 5115A USB User’s Guide • www.powerware.com.au 5