Troubleshooting
Table 8. Troubleshooting Guide (continued)
Alarm or Condition | Possible Cause | Action |
|
| ||
|
| 3 beeps | Failed attempt to start the | Plug the UPS into a power outlet for 24 hours to | ||
|
| every 10 | UPS on battery. | charge the battery. After charging the battery, press | ||
|
| seconds |
| and hold the | button for 3 seconds. |
|
|
|
|
| |||
|
|
|
| Then check the | indicator. If the | still |
|
|
|
| flashes, see “UPS Maintenance” on page 15 to | ||
|
|
|
| replace the battery. |
| |
Continuous | The output wave is |
beep | abnormal while the UPS is |
| on battery. |
Shutdown is imminent. Save your work and turn off your equipment. Turn off the UPS. Contact your service representative.
Continuous | The output voltage is below |
beep | or above the limit while the |
| UPS is on battery. |
Save your work and turn off your equipment. Turn off the UPS. Contact your service representative.
28 | Powerware | ® | 5115A USB User’s Guide | • www.powerware.com.au |
|
|
