C O M M E R C I A L P R O D U C T S D I V I S I O N
SMARTRATE® DISPLAY
A user must enter an AGE (during the program Setup prompts) and wear a chest strap, while in a program, before the blinking segment in the bar graph can show the zone that his or her heart rate is in, either:Weight Loss or Cardiovascular.
Weight Loss Zone: Maintaining the heart rate between 55% and 70% of the user’s maximum aerobic heart rate, helps burn enough calories that, when continued on a regular basis for 30 minutes or more, provides the greatest
Cardiovascular Zone: Maintaining the heart rate between 70% and 85% of the user’s maximum aerobic heart rate, helps (when continued on a regular basis for 30 minutes or more) improve the user’s overall cardiovascular/ cardiorespiratory fitness level.
Important: During a program, a user’s heart rate must be above 40 beats per minute before the segment begins to blink. Note that pressing QUICKSTART, at the Precor banner display, disables the SmartRate® display feature.
HEART RATE: The heart rate display lets the user monitor their heart rate. When a heart beat is detected, the number appears in the small upper right display (refer to Diagram 20). If the user does not grasp the grips on the handrail or wear the optional chest strap, a heart rate will not be detected and no pulse rate appears.
SETUP MODE AND PROMPTS
From the Precor banner, a user accesses the Setup mode which lets him or her “set” the program, workout time, weight, and age parameters prior to working out.
The Precor banner is the “starting point” to begin a workout. It indicates that the C936i is ready to accept user entries. If the banner does not appear on the display, press the RESET key. If the display appears blank, make sure that the treadmill is turned ON.
Note: Key presses to the INCLINE ▼▲ or SPEED ▼▲ keys are ignored when the banner is being displayed. Refer to page 33 for more information about the keypad.
PROGRAM: The abbreviated program name and profile appears on the display. The ▼ and ▲ keys allow the user to scroll through the available programs. The left portion of the display presents the abbreviated name of the program, while the right half displays the program profile. The text blinks indicating that it is awaiting approval.To choose the selection being displayed and continue in Setup mode, press Enter. (Refer to The Setup Mode and the QuickStart Feature on page 30.)
Note: Depending on the program that is selected, the user may be prompted for other information. Refer to Programs on page 41.
page 29
