C O M M E R C I A L P R O D U C T S D I V I S I O N
CALORIES: Provides the cumulative number of calories being burned by the user.
INCLINE: Displays the selected percent of incline during a workout.The INCLINE ▲ and ▼ keys affect the treadmill’s lift and let the user set an incline between 0 percent and 15 percent. The displayed values change in 0.5 percent increments. Refer to INCLINE ▲▼ keys on page 33.
When the INCLINE field is selected and the target incline changes, the target incline continues to be displayed as the lift moves to the new incline level. A few seconds after the lift reaches the requested incline, the display no longer appears.
Note: To check the incline (when it is not the chosen display) any time during a workout, lightly press either INCLINE ▲ or ▼ key for less than two seconds. If a user presses the INCLINE ▲ or ▼ key for more than two seconds, the treadmill’s incline will change.
PROFILE: At the beginning of a program, the profile appears on the right side of the display and corresponds to the program that the user selected. As the user proceeds through his or her workout, the position in the program is indicated by a blinking column. The height of the column indicates the level of incline. Every time the incline changes by several sequential levels (up or down) the height of the column changes by one cell.
CALORIES PER MINUTE: Indicates the approximate number of calories being burned per minute.
METS: Displays the metabolic equivalents associated with a user’s current energy expenditure level. A METS level of 1 represents the body at rest. Note that when the running belt stops moving, the METS value displays zero.
SPEED: Displays the running belt’s speed. The running belt speed ranges from
0.5to 11 mph (1 to 18 kph), but a maximum speed can be set by the club (see Club Information on page 23). The SPEED ▼▲ keys let a user decrease or increase the running belt’s speed in 0.1 increments.
Important: To check the speed (when it is not the chosen display) any time during a workout, the user can lightly press either SPEED ▼ or ▲ key (for less than two seconds). The running belt’s speed appears in the right portion of the display. If a user presses the SPEED ▼ or ▲ key for more than two seconds, the treadmill’s speed will change.
PACE: Displays the user’s target speed in minutes and seconds per mile (or kilometer). The user’s pace appears in the TIME field when the SPEED indicator is not lit and the user taps the SPEED ▼ or ▲ key.
page 32
