Precor C936i owner manual Display Features During a Workout

C O M M E R C I A L P R O D U C T S D I V I S I O N

Press QUICKSTART at

AGE prompt

The following occurs:

The age (1 through 99) that appears on the display becomes the designated age that the C936i uses for SmartRate®. A correct age entry between 1 and 99 is very important if the user plans to utilize the heart rate characteristics of the treadmill. The QUICKSTART key acts the same as the ENTER key at this point because all the Setup prompts have been answered.

DISPLAY FEATURES DURING A WORKOUT

Note: The Setup prompts that appear in this display prior to a workout need to be addressed using the keypad keys. Refer to Setup Mode and Prompts on page 29.

During workouts, the program profile that appears in the display corresponds to the selected program.The blinking column in the program profile indicates the incline level and user’s progress along the program.

Once the running belt begins moving, indicator lights appear in the columns below the display and indicate which information is being displayed. A user can highlight a particular feature by pressing the appropriate SELECT key.

The following describes the information that can appear in the display.

TIME: As a user works out, TIME indicates the amount of time spent in his or her work out. The time (00:00) display appears when the workout begins. Time appears in minutes and seconds. However, should a user exceed 60 minutes (during a single workout), the Time display converts to hours and minutes. When QUICKSTART is pressed at the banner or INFINITE is available and is selected during the Setup prompts, the Time display shows how long a user has been working out. However, in warm-up and cool-down periods, and in all other programs, the Time display indicates the minutes remaining.

Important: A user’s “pace” (time per mile or kilometer) can also be displayed in the TIME field. Refer to the SPEED keys on page 34.

DISTANCE: The distance travelled appears (0.00) once a user begins a program. The distance can appear in miles or kilometers. Note that if the distance exceeds 65 miles (km) in a single workout, the display resets to zero. To change which units of measure appear on the display, the club owner or manager can follow the instructions found in Club Information on page 23.

page 31