Printronix T5000e - page 29

Loading Roll Media
29
8. Lower the media damper.
9. Verify that the left edge of the media is against the fixed guide
on the bottom of the media damper.
10. Push the media width guide in until it is flush with the outer
edge of the media.
11. Check the hor izontal position of the lower media sensor (shown
above) and the upper media sensor (shown on page 34).
(See “Positioning The Media Sensors” on page 35.)
Media
Guard
Lower
Media Sensor
Fixed
Guide
Media
Damper
Media Width
Guide