Chapter 2 QUICK SETUP Menu
46
Power-Up Config.
You can specify one of the eight configurations as the po wer-up
configuration. The default is Factory.
SMT: Status
See “Software Migration Tools (SMT)” on page 65.
•Disabled.The printer disables the use of the Software
Migration Tools.
•Enabled. The printer enables the use of the Software Migra tion
Tools.
SMT: Sel Toolset
See “Software Migration Tools (SMT)” on page 65.
•Toolset [1]. SMTs for PGL® emulation.
•Toolset [2]. SMTs for PPI1 emulation.
•Toolset [3] and Toolset [4]. Reserved for internal use and
future design.
SMT: Select Tool
See “Software Migration Tools (SMT)” on page 65.
•EPC, GTIN, UPCA, EAN8, EAN13, and UCC128. SMTs
displayed if Toolset [1] is selected under SMT: Sel Toolset.
•zEPC, zGTIN, zUPCA, zEAN8, zEAN13, and zUCC128. SMTs
displayed if Toolset [2] is selected under SMT: Sel Toolset.
NOTE: Undocumented options are reserved for internal use and
future design.