Chapter 3 Error Messages
Error Messages
The RFID encoder can detect a number of errors. When one of these errors occurs, the RFID encoder alerts the printer to perform the currently selected error action (see “Error Handling” on
page 51) and display the appropriate error message on the control panel’s LCD (see Table 2).
Table 2. Control Panel Error Messages
Error Message | Explanation | Solution |
|
|
|
|
|
|
RFID MAX RETRY | Error Handling = Overstrike in | Press PAUSE to clear the |
Check System | the RFID CONTROL menu, | message. |
| and the Label Retry count has | See “Troubleshooting” on |
| been exhausted. | page 69. |
|
|
|
RFID Comm Err | RFID error: communication | Press PAUSE to clear the |
Check Cable | cannot be established with | message. |
| the RFID encoder. Reader | See “Troubleshooting” on |
| will be set to Disable in the | page 69. |
| RFID CONTROL menu and |
|
| the previous port settings |
|
| restored. |
|
|
|
|
RFID TAG FAILED | Error Handling = Stop in the | Press PAUSE to clear the |
Check Media | RFID CONTROL menu, and | message. |
| the RFID encoder could not | See “Troubleshooting” on |
| read the RFID tag. | page 69. |
|
|
|
68
