Chapter 2 QUICK SETUP Menu
44
•Inv. Landscape. Inverse Landscape refers to horizontal
orientation, where the width of a page is greater than it s height.
The top edge of the image is parallel to the right edge of the
media. The following example is viewed from the front of the
printer.
Gap/Mark Sensor
Specifies the sensor type needed for detecting the top-of- form
position on media with label length indicators (gaps , notches, holes,
or black marks).
•Disable. Select when using media with no label length
indicators (no gaps, notches, holes, or black marks ), or
when
you want the printer to ignore all existing label length indicators
on the installed media.
NOTE: When you select Disable, the length of each label is based
on the Label Length value entered.
•Mark. Select when using media that has horizontal black marks
located on the underside of the label liner or tag stock. T he
top-of-form position is the leading edge of the black mark.
•Gap. Select
when using media with a liner space between
die-cut labels or when using tag stock with notches or holes as
label length indicators on white background media. The
top-of-form position is the leading edge of the die cut label
(trailing edge of the gap, notch, or hole).
4”
FEED
6”
The top edge of
the image is
parallel to the right
edge of the media.
Leading Edge