Chapter 2 Loading Media And Ribbon
26
Loading Media And Ribbon
IMPORTANT
Printronix recommends using the supplied starter roll of 100
labels to set up and verify printer operation. This will avoid
expending the more expensive smart labels for this task.
CAUTION
DO NOT TOUCH the printhead or the electronic components
under the printhead assembly.
CAUTION
Do not close the pivoting deck without label stock installed
between the printhead and the platen, because debris on the
platen may damage the printhead.

Loading Roll Media

1. Slide the media hanger guide outward to the end of the media
hanger, and flip it down into the horizontal position (as sh own).
2. Open the pivoting deck by rotating the deck lock lever fully
clockwise.
Media Hanger
Media Hanger
Guide
Deck Lock
Lever
Pivoting
Deck
RFID Encoder